자동 판별 유형 LCR 미터
원터치에서 LCR의 구별과 측정 데이터를 표시
· 세부 데이터는 화면 스크롤 표시
· 측정 주파수는 DC, 1kHz, 15kHz, 200kHz에서 자동 설정 표시 매개 변수 및 범위 · L 인덕턴스 직류 저항 테스트 주파수 1μH ~ 10H · C 정전 용량 테스트 주파수, 0.4pF ~ 10,000 μF · R 저항 1Ω ~ 2MΩ 테스트 주파수 DC, 1kHz, 15kHz, 200kHz에서 자동 설정 LCR 미터 작업 · 2 이 클립을 장치 연결합니다 on-test 버튼을 누릅니다 장치의 종류와 측정 값이 표시됩니다 · scroll-off 버튼을 누르면 다음 매개 변수가 표시됩니다 LCR 미터 교정 프로브를 쇼트시켜 on-test 버튼을 길게 누르는 것으로 교정 모드로 들어갑니다. 교정을 수행함으로써 프로브 및 케이블 불필요 리액턴스 분을 취소할 수 있습니다. 교정 데이터는 비휘발성 메모리에 저장됩니다 프로브 및 케이블은 원본이 아닌 것으로 교체해도 교정은 가능합니다

※ 표시와 설명서는 영어 입니다만, 기본적으로 파트를 연결하고 전원을 넣어 5 초 기다린다! 액정 표시도 익숙한 단어이므로 손을 뗄 수없는 필수 아이템이 될 것입니다.

2012.4.18 참고 자료 LCR40 제품 브리프 (416KB)  LCR40 일본어 설명 (0.98MB)

 ☆ 별매 옵션 소개 · 케이스 ( M-05473 ) · SMD 부품 용 핀셋 ( M-05471 ) · 예비 건전지 ( A23 타입) ( B-02351 )

☆ PeakElectronicDesignLimited 제품 판매를 시작했습니다. 별도 디렉토리 참조

The Atlas LCR automatically identifies and analyses almost any passive component (Inductor, Capacitor or Resistor). It measures it's parameters using automatically selected test frequencies (DC, 1kHz, 15kHz and 200kHz).
Inductance from 1uH to 10H (min resolution is 1uH), Capacitance from 1pF to 10000uF (min resolution is 1pF) and Resistance from 1ohm to 2Mohm.
Supplied with 2mm plugs and sockets with hook probes and battery.

The World’s First The Atlas LCR is an advanced instrument that greatly simplifies the testing of passive components. Traditional LCR bridges are inherently complex and very time consuming to use. The Atlas LCR does everything automatically, it tells you the component type in addition to component value data. What’s more, the Atlas LCR automatically selects the best signal level and frequency for the particular component under test. It doesn’t get any easier than this Just clip the universal test leads to your component and press the test button. In seconds, the Atlas LCR will identify the type of component (Inductor, Capacitor or Resistor) together with the component’s main value. Additionally, further component data is also displayed, such as the DC resistance of an inductor. The test frequency is automatically selected to suit the component under test and this is also confirmed on the scrollable display. Supplied complete with battery and new 2mm compatible hook probes

Flexible The Atlas LCR is supplied with our new 2mm compatible detachable micro-hooks, allowing the use of a range of 2mm compatible probes.

Surface mount probes are available as an optional accessory Optional Gold Croc Set

Parameters Minimum Typical Maximum Notes Resistance range 1R   2MR   resolution 0.3R 0.6R     accuracy Typically ±1.0% ±1.2R 1,2,6 Capacitance range 0.5pF   10,000µF   resolution 0.2pF 0.5pF   accuracy Typically ±1.5% ±1.0pF 1,2,5 Inductance range 1µH   10H   resolution 0.4µH 0.8µH     accuracy  Typically ±1.5% ±1.6µH 1,2,4 Peak test voltage (across O/C) -1.05V   +1.05V   Peak test current (thru S/C) -3.25mA   +3.25mA   Test Frequency Accuracy 1kHz -1.5% ±1% +1.5%   14.925kHz -1.5% ±1% +1.5%   200kHz -1.5% ±1% +1.5%   Sine Purity Typically -60dB 3rd harmonic   Operating temperature range 10°C   40°C 3 Battery operating Voltage 8.5V   13V         Example screenshots for some typical components: A view inside: Notes for table above: 1. Within 12 months of factory calibration. Please contact us if you require a full re-calibration and/or certification of traceable calibration. 2. Specified at temperatures between 15°C and 30°C. 3. Subject to acceptable LCD visibility. 4. For inductances between 100µH and 100mH. 5. For capacitances between 200pF and 500nF. 6. For resistances between 10Ω and 1MΩ.

Typical Accuracy Curves For Capacitance, Inductance and Resistance

Atlas LCR - Passive Component Analyser - Model LCR40   Data Sheet User Guide

Customers who bought the Atlas LCR also bought: SMD Tweezer Probes Spare Battery Padded Carry Case